Skip to content
Glossary

What Is a Catch Basin?

A Catch Basin is a drainage structure that collects surface water through a grated cover and sends it into a connected pipe. The basin holds sediment and debris below the outlet, which helps protect downstream drainage lines. Landscape grading design uses catch basins where slopes direct runoff toward a controlled collection point.

Reviewed by Adam Gorski

Local relevance: Bellevue's wet winter climate can send frequent runoff across sloped residential lots, so grading must direct water toward stable collection and discharge points.

Quick Facts About Catch Basin

Category

Surface drainage structure

Used for

Collecting and routing runoff

Common confusion

Often mistaken for a storm drain

Also called

Drainage Inlet

Often discussed with

Landscape Grading Design

Key Takeaways About Catch Basin

  • A grated cover separates the basin from open surface runoff.
  • The lower sump holds sediment before water enters the outlet pipe.
  • A catch basin isn’t the same as a simple surface drain.

How Catch Basin Works

A close-up of a metal drain grate with the words “CATCH BASIN” and trapped gravel below

A catch basin sits below a grated cover at a low point in a graded area. Runoff passes through the grate and collects inside the chamber. The chamber's lower space lets soil, leaves, and small stones settle before water reaches the outlet.

Related glossary terms: Stormwater Inlet, Contour Grading, Grading Plan.

A connected pipe carries the collected water toward an approved discharge area or another drainage feature. The basin location depends on the finished slopes, nearby paving, soil conditions, and the planned drainage route. A stormwater inlet may collect water too, but it often lacks the deep sediment-holding space found in a catch basin.

Two hands remove wet debris from a concrete drain with a trowel and rusted grate outdoors

Expert Note

When we develop a Landscape Grading Design, we review where runoff gathers and where the outlet can safely carry it. We coordinate the basin rim with the finished grade, then check that nearby surfaces slope toward the grate without creating low spots.

Catch Basin in Practice: A Real-World Example

A backyard patio sits below a sloped lawn, so the grading design directs runoff toward a catch basin near the lawn edge. A buried outlet pipe then carries collected water away from the patio area.

Related Terms

Stormwater Inlet

A stormwater inlet is a ground-level opening that collects rainwater runoff and directs it into a…

Contour Grading

Contour Grading is a land-shaping method that follows the natural form of a site. It creates…

Grading Plan

A Grading Plan is a site drawing that shows how land will be shaped to guide…

Underdrain

Underdrain is a buried drainage system that collects water in soil and carries it away through…

LandscaperBellevuewa.com

Have Questions About Catch Basin?

Contact LandscaperBellevuewa.com for practical guidance on Catch Basin and related landscape architect company work in Bellevue.

(425) 587-8011