Skip to content
Glossary

What Is a Stormwater Inlet?

A stormwater inlet is a ground-level opening that collects rainwater runoff and directs it into a drainage system. It may have a grate, curb opening, or covered box. In a grading plan, the inlet marks a controlled collection point where paved areas, lawns, and planting beds send water toward a safe discharge location.

Reviewed by Adam Gorski

Local relevance: Bellevue's wet winter climate can send runoff across sloped lots, so grading plans must show clear flow paths toward suitable stormwater collection points.

Quick Facts About Stormwater Inlet

Category

Drainage component

Used for

Collecting surface runoff

Common confusion

French drain

Also called

Drain Inlet, Surface water inlet

Often discussed with

Landscape Grading Design

Key Takeaways About Stormwater Inlet

  • It collects runoff at a planned low point.
  • The surrounding grade controls how water reaches it.
  • It is not the same as a French drain.

How Stormwater Inlet Works

A person measures a small drain model at a desk while a monitor shows a stormwater inlet image

A stormwater inlet sits at a planned low point in the finished grade. Rainwater flows across the surface and enters through a grate or opening. A connected pipe then carries the water toward a drainage outlet, storage area, or other planned destination.

Related glossary terms: Catch Basin, Grading Plan, Contour Grading.

Grading design controls the flow path around the inlet. The plan shows the direction of surface flow and the relationship between the inlet, nearby paving, soil, and planting areas. A catch basin may sit below the opening to hold sediment and debris before water enters the pipe.

Inlets work best when the surrounding grade leads water toward the opening without creating standing water beside buildings, paths, or walls.

Hands use a metal tool to scrape dirt from a floor drain inside a room

Expert Note

When we design grading around a stormwater inlet, we check the proposed surface elevations and flow arrows together. We also review nearby doors, paving, walls, and planting areas so the inlet fits the drainage pattern without creating a low spot in the wrong place.

Stormwater Inlet in Practice: A Real-World Example

A backyard renovation may place a stormwater inlet near the low edge of a patio. The grading plan directs runoff toward the inlet, and the connected drainage route carries water away from the patio and planting beds.

Related Terms

Catch Basin

A Catch Basin is a drainage structure that collects surface water through a grated cover and…

Grading Plan

A Grading Plan is a site drawing that shows how land will be shaped to guide…

Contour Grading

Contour Grading is a land-shaping method that follows the natural form of a site. It creates…

Runoff Coefficient

A runoff coefficient is a value that shows how much rainfall may flow across a surface…

LandscaperBellevuewa.com

Have Questions About Stormwater Inlet?

Contact LandscaperBellevuewa.com for practical guidance on Stormwater Inlet and related landscape architect company work in Bellevue.

(425) 587-8011